User's Manual

7 Managing Security
144 Installation and Configuration Guide: Airgo Access Point
Figure 105: Authentication Zones - Add Auth Zones
To add a new authentication server, click Add Auth-Server, and enter the following values for
each new RADIUS server:
Click Add to save the values, or click Reset to clear the fields on the panel.
Click Back on your browser to return to the Auth Zone panel. Set an authentication zone for
administrative users by selecting from the pull-down list.
Authentication Servers
Open the Authentication Servers tab (Figure 106) to view the current authentication servers and
add or delete servers.This table shows the list of both internal (security portals) and external auth
servers. The servers that do not have a check box against them are security portals.
Figure 106: Authentication Zones - Auth Servers
Configuring Administrator Security
Choose Administrator Security from the Security Services menu to open the Administrator
Security panel (Figure 107).
Field Description
Auth Server IP address of the RADIUS authentication server.
Shared Secret Enter and confirm the secret key.
Port Number Port number for the server (default is 1812).