User's Manual

9 Managing the Network
190 Installation and Configuration Guide: Airgo Access Point
Click Add to save the configuration information.
IP Range
Select IP Range to configure address ranges for DHCP leases (Figure 143).
Figure 143: NM Services - DHCP Configuration - IP Range
Enter the following information on this panel:
NTP Server Enter the IP address of the server or servers used to synchronize network
clocks. There is no default. More than one NTP IP address may be specified
(space separated).
If you delete NTP servers, only those added manually are deleted. DHCP-
assigned NTP servers continue to be available.
Field Description
Interface Name Confirm the alphanumeric name of the AP interface. The default is br1, which
is the default bridge.
IP Address Range Select a radio button to specify the range of addresses available for
assignment. Choose either of the following:
IP Address/Maskbits—Enter the address and maskbits that define the
subnet to be used for address assignment.
Use Fixed IP Address Range—Specify a range of IP addresses by entering
starting and ending addresses, with subnet prefix length.
Field Description