User's Manual

Using the NM Services Menu
Installation and Configuration Guide: Airgo Access Point 189
DHCP Options
Select the DHCP Options tab (Figure 142)to activate and configure the DHCP server.
Figure 142: NM Services - DHCP Configuration - DHCP Options
To activate the server, Enable DHCP Server and configure the following information:
Field Description
Lease Time Specify the maximum number of leases that the server should assign. This is
used to restrict the number of IP addresses served even though the IP subnet
served by the DHCP server may be large
Maximum Leases Specify the maximum number of available leases. There is no default.
Gateway Enter the IP address of the gateway. There is no default.
DNS Server IP Address Enter the IP address of the server or servers that provide domain name
resolution. There is no default. More than one DNS IP address may be
specified (space separated). If the field is left blank, then any previously
configured DNS server addresses will be deleted.
If you delete DNS servers, only those added manually are deleted. DHCP-
assigned DNS servers continue to be available.
WINS Server Enter the IP address of the Windows name server used to map IP addresses to
computer names. There is no default.