User's Manual

9 Managing the Network
184 Installation and Configuration Guide: Airgo Access Point
Figure 137: NM Services - Discovery Configuration - Scope/Seed
Configure the following fields on this tab:
Click Apply to save the selections and add them to the Discovery Scope Table at the bottom of the
panel.
Rogue AP
Use the Rogue AP tab (Figure 136) to enable or disable discovery of rogue access points. The
default is Enabled. Click Apply to save the setting. If enabled, NM Portal automatically scans the
network to detect IP and wireless rogue access points. For more information, see “Managing Rogue
Access Points” on page 173.
Field Description
Discovery Scope Enter the IP address of the subnet that you want to discover.
Discovery Scope -
Subnet Maskbits
Enter the subnet prefix length for the discovery scope.
Discovery Seed Specify a seed IP, which is the first address NM Portal will attempt to
discover in the selected subnetwork.