User's Manual

9 Managing the Network
176 Installation and Configuration Guide: Airgo Access Point
Figure 128: IP Rogue AP - Classified
Wireless Rogue AP Management
Wireless rogue management differs from IP rogue management in the type of discovery used to
determine whether the AP is authorized to be part of the network. In wireless discovery, each AP
scans the beacons sent by other APs within range and attempts to identify the APs from the
information in the beacon.
Select Wireless Rogue AP from the Rogue AP menu to open the table of unclassified wireless
rogue APs. This panel (Figure 129) lists the following information for each IP rogue:
Field Description
MAC Address MAC address of the unclassified rogue AP
Reporting AP The device ID of the AP or APs that identified the rogue AP. If this field is
empty, that means that the rogue device was detected in a previous scan, but
not in the most recent scan.
Detection Time Time that the AP was last detected
Class Radio Neighbor or Radio & IP Neighbor
Signal Strength Strength of the beacon (dBm)
BSS Type Infrastructure or ad-hoc (IBSS)
SSID SSID sent in the rogue beacon
Channel ID Radio channel on which the AP was discovered