User's Manual

Managing Rogue Access Points
Installation and Configuration Guide: Airgo Access Point 175
Perform the following functions from this tab:
Figure 127: IP Rogue AP - Classify
Classified Tab
The Classified tab (Figure 128) lists all the APs designated as known through IP classification. It
contains the following information for each classified AP:
Function Steps
Classify an AP as
known
1 Select the AP from the list. APs are identified by Airgo device ID and IP
address, if known.
2 Click Classify-Node to open the Classify the Rogue AP panel
(Figure 127).
3 Select Our-Network to classify the AP as known within your wireless
network. Select Neighbor-Network to classify the AP as known in a
neighboring network.
4 Click Apply.
The AP is now classified. The classification information is retained in the NM
Portal database and presented on the Classified tab (Figure 128). This
information is retained upon AP reboot.
Delete an AP from the
rogue list
Click Delete and click OK to confirm. If an AP is deleted from the list
and then discovered in a subsequent scan, it is added to the list again.
Delete from the list all
APs classified as IP
rogues
Click Delete all IP-Unclassified Rogues, and click OK to confirm.
Field Description
AP Name of the AP, by default, the MAC address
Device ID Unique identifier for the AP
Thumbprint Factory-generated identifier used for AP enrollment
Portal Services Portal services (enrollment, security, NM portal) configured on the AP
Operational State Indicator of whether the AP is currently active
Discovery Method IP or wireless discovery
Time Discovered Time of the last IP scan that detected the AP. This value is updated each time
the AP is detected.
Node State Identifies whether the AP has been classified as a member of Our-Network or
Neighbor-Network
MAC Address MAC address of the AP