User's Manual

9 Managing the Network
166 Installation and Configuration Guide: Airgo Access Point
Figure 120: Network Topology - AP Enrollment - Not Enrolled
Perform the following functions from this panel:
Function Description
Enroll an AP 1 Select the desired AP, and click Enroll to open the Enroll an AP Entry
panel (Figure 121). If the AP is not in the factory default state, a message is
presented. Click the AP link to open the web interface for the AP and reset
it to the factory default configuration.
2 After verifying the information on the panel (Table 13), enter the correct
password, and click Enroll. It takes a couple of minutes to enroll the AP.
Delete an AP Select an AP and click Delete to remove it from the list.
Refresh Click to update the display.
Rediscover Now Scan the network to discover APs and update the Not Enrolled APs table.