User's Manual

Guest Access Services Panel
Installation and Configuration Guide: Airgo Access Point 159
Figure 115: Guest Access Configuration - Guest Table
Perform the following functions from the Guest Table:
Function Description
Add an entry to the
Guest Table
One guest profile can be added for each SSID. If a profile is already assigned
to an SSID and you add a new one, it replaces the previously defined profile.
1 Click Add.
2 Select the SSID.
3 Select the service profile from the Profile pull-down list.
4 If desired, enter the address and maskbits for a subnet optionally reserved
for unauthenticated guest access.
5 Select an internal or external landing page. If the external page is selected,
enter the full URL and the shared secret code used for communicating with
the RADIUS server.
6 Click Apply.
Modify an entry 1 Select the entry you wish to modify, and click Modify.
2 Confirm the SSID.
3 Select the service profile from the Profile pull-down list.
4 If desired, enter the address and maskbits for a subnet optionally reserved
for unauthenticated guest access.
5 Select an internal or external landing page. If the external page is selected,
enter the full URL and shared secret code for access.
Click Apply.