User's Manual

Security: EAPOL Group 2 key exchange timeout
Installation and Configuration Guide: Airgo Access Point 273
type %d and enc-type %d"
Description: This notification is generated when an STA fails to send the WPA EAPOL-Key
Group Message #2 in time to complete its authentication sequence with a radio,
using the specified authentication type and encryption.
Usage: This indicates the failure of a STA to complete the Group Key exchange in a timely
fashion.
Examples: For device-id AP_00-0A-F5-00-01-89 , the STA 00:0a:f5:00:05:f0 [0] on radio 0 with user
paul and SSID NewYorkRm did not send the WPA EAPOL-Key Group Messg #2 in time
where auth-type 4 and enc-type 6
See Also:
Alarm Parameters
DeviceId The Device ID of the Airgo AP
Station MAC address of the Station.
bpIndicator Identifies if the supplicant is a BP (1), or a STA (0).
Radio Identifies Radio by interface ID on the Access Point
User User ID established during EAPOL Authentication exchange (if
applicable)
SSID Identifies the SSID on this AP that the STA has associated with.
Authentication type The valid types include: WPA PSK (3), WPA EAP (4)
Encryption Type The valid types include: TKIP (5), AES (6)
Alarm Severity
Severity Critical