User's Manual

Security: EAPOL Key exchange – message 2 timeout
Installation and Configuration Guide: Airgo Access Point 271
Security: EAPOL Key exchange – message 2 timeout
Notification which indicates that the STA has failed to respond, in a timely manner, with EAPOL 4-
way handshake message number 2.
Syntax: "For device-id %s, the STA %s[%d] on radio %d with user %s and SSID %s
did not send the WPA EAPOL-Key Pairwise Messg #2 in time where auth-
type %d and enc-type %d"
Description: This notification is generated when an STA fails to send the WPA EAPOL-Key
Pairwise Message #2 in time to complete the pairwise key exchange.
Usage: This indicates the failure of a STA to complete the EAPOL 4-way key exchange in
a timely fashion.
Examples: For device-id AP_00-0A-F5-00-01-89 , the STA 00:0a:f5:00:05:f0 [0] on radio 0 with user
paul and SSID NewYorkRm did not send the WPA EAPOL-Key Pairwise Messg #2 in time
where auth-type 4 and enc-type 6
See Also:
Alarm Parameters
DeviceId The Device ID of the Airgo AP
Station MAC address of the Station.
bpIndicator Identifies if the supplicant is a BP (1), or a STA (0).
Radio Identifies Radio by interface ID on the Access Point
User User ID established during EAPOL Authentication exchange (if
applicabe)
SSID Identifies the SSID on this AP that the STA has associated with.
Authentication type The valid types include: WPA PSK (3), WPA EAP (4)
Encryption Type The valid types include: TKIP (5), AES (6)
Alarm Severity
Severity Critical