User's Manual

Security: EAP User-ID timeout
Installation and Configuration Guide: Airgo Access Point 269
Description: This notification is generated when a TKIP counter measures lockout period for 60
seconds is started.
Usage: This indicates that the AP has determined that an attempt is underway to
compromise the secure operation of TKIP. This happens if two MIC failures are
detected within a 60 second interval. If this happens, the AP disassociates all STAs
and prevents new STAs from associating for a period of 60 seconds.
Examples: For device-id AP_00-0A-F5-00-01-89 , the TKIP counter-measures lockout period has
started for 60 seconds.
See Also:
Security: EAP User-ID timeout
Notification which indicates that the STA has failed to respond, in a timely manner, with its User-
ID during the authentication exchange.
Syntax: "For device-id %s, the STA %s[%d] on radio %d and SSID %s did not send
its user-id in time to complete its auth sequence with auth-type %d and enc-
type %d."
Description: This notification is generated when an STA fails to send its user-id in time to
complete its authentication sequence using the specified authentication type.
Usage: This indicates the failure of a STA to complete the EAP authentication exchange in
a timely fashion. The two authentication modes that require the STA to send its
user-id are WPA EAP and legacy 8021.x for dynamic WEP. This trap might
indicate that a user prompt is not attended to on the client side.
Examples: For device-id AP_00-0A-F5-00-01-89 , the STA 00:0a:f5:00:05:f0 [0] on radio 0 and SSID
NewYorkRm did not send its user-id in time to complete its auth sequence with auth-type
4 and enc-type 6
Alarm Parameters
DeviceId The Device ID of the Airgo AP
Station MAC address of the Station.
bpIndicator Identifies if the supplicant is a BP (1), or a STA (0).
Radio Identifies Radio by interface ID on the Access Point
SSID Identifies the SSID on this AP that the STA has associated with.
Authentication type The valid types include: LEGACY 8021.x (2), WPA EAP (4)
Encryption Type The valid types include: WEP-64 (1), WEP-128 (2), TKIP (5), AES
(6)
Alarm Severity
Severity Critical