User's Manual

Security: STA Detected Bad TKIP MIC on Incoming Unicast
Installation and Configuration Guide: Airgo Access Point 267
Description: This notification is generated when a bad TKIP MIC is detected by a local BP
radio, identified by aniApRadioIndex, on an incoming multicast or broadcast
packet from the AP where the packet is encrypted with the group/multicast/
broadcast key..
Usage: This indicates that the BP has detected an invalid TKIP MIC value on a received
multicast/broadcast frame.
Examples: For device-id AP_00-0A-F5-00-01-89 , a bad TKIP MIC was detected by local BP radio 0 on
an incoming multicast/broadcast packet from the AP 00:0a:f5:00:06:22
See Also: BP Detected Bad TKIP MIC on Incoming Unicast
Security: STA Detected Bad TKIP MIC on Incoming Unicast
Notification which indicates that a STA associated with this AP has detected a BAD TKIP MIC
value in a frame it received from the AP encrypted with the pairwise/unicast key.
Syntax: "For device-id %s, a bad TKIP MIC was detected by STA %s on radio %d
on an incoming unicast packet from the AP"
Description: This notification is generated when a bad TKIP MIC is detected by an STA
associated with this AP on an incoming unicast packet from the AP, where the
packet is encrypted with the pairwise/unicast key.
Usage: This indicates that the STA has detected an invalid TKIP MIC value on an
incoming frame encrypted with the pairwise/unicast key.
Examples: For device-id AP_00-0A-F5-00-01-89 , a bad TKIP MIC was detected by STA
00:0a:f5:00:05:f0 on radio 0 on an incoming unicast packet from the AP
DeviceId The Device ID of the Airgo AP
Radio Identifies Radio by interface ID on the Access Point
AP MAC address The MAC address of the source AP
Alarm Severity
Severity Critical
Alarm Parameters
DeviceId The Device ID of the Airgo AP
Station MAC address of the Station.
Radio Identifies Radio by interface ID on the Access Point
Alarm Severity
Severity Critical