User's Manual

Security: STA has failed security enforcement check
Installation and Configuration Guide: Airgo Access Point 263
Security: STA has failed security enforcement check
Notification which indicates that the AP has determined that a STA has failed the security
enforcement checks for its service profile.
Syntax: "For device-id %s, the STA %s on radio %d with user %s and SSID %s of
group %s failed the security enforcement check with auth-type %d and enc-
type %d at enforcement level %d"
Description: This notification is generated if the STA fails the security enforcement checks for
its service profile
Usage: This indicates that the STA is attempting to use an encryption type that is not
allowed in its service profile. The service profile is determined based on the SSID
and user group of the STA. Note that the AP may advertize multiple encryption
capabilities, but different STAs might be restricted to different subsets of
encryption capabilities based on their service profiles.
Examples: For device-id AP_00-0A-F5-00-01-89 , the STA 00:0a:f5:00:05:cc on radio 0 with user
paul and SSID NewYorkRm of group employee failed the security enforcement check with
auth-type 4 and enc-type 5 at enforcement level 1
See Also:
Alarm Parameters
DeviceId The Device ID of the Airgo AP
Station MAC address of the Station.
Radio Identifies Radio by interface ID on the Access Point
User Supplicant User ID
SSID Identifies the SSID on this AP that the STA has associated with.
Group Group tag for this user (determined from RADIUS configuration)
Authentication Type The valid types include: NONE (0), SHARED KEY (1), LEGACY
EAP (2), RSN PSK (3), RSN EAP (4)
Encryption Type The valid types include: NONE (0), WEP-64 (1), WEP-128 (2),
TKIP (5), AES (6)
Enforcement Level The security enforcement level configured in the service profile: AES
ONLY (1) TKIP OR AES (2), WEP ONLY (3), NO ENCRYPTION
(4), DEFAULT ENFORCEMENT (5)
Alarm Severity
Severity Critical