User's Manual

C Alarms
262 Installation and Configuration Guide: Airgo Access Point
Description: This notification is generated when an upstream AP sends an EAP success before
authentication is completed. This may be a rogue AP trying to force an AP to join
even before authentication is complete.
Usage: This indicates that the local BP has received an EAP-Success before authentication
has even been completed.
Examples: For device-id AP_00-0A-F5-00-01-89 , the upstream AP 00:0a:f5:00:06:22 with SSID
NewYorkRm authenticating via local BP radio 0 sent EAP-Sucess before authentication
completed : IT MIGHT BE A ROGUE AP
See Also:
Security: Profile not configured for user-group
Notification which indicates that the AP has determined that a STA is a member of group for which
a corresponding service profile has NOT been configured in this SSID.
Syntax: "For device-id %s, the STA %s on radio %d with user %s is in group %s but
SSID %s has no profile configured for that group"
Description: This notification is generated during Station authentication when no service profile
has been configured for a given Group.
Usage: This indicates that the AP has detected a STA is authenticating which is a member
of a group for which no service profile has yet been configured in this SSID.
Examples: For device-id AP_00-0A-F5-00-01-89 , the STA 00:0a:f5:00:05:cc on radio 0 with user
paul is in group employee but SSID NewYorkRm has no profile configured for that group.
See Also:
Severity Critical
Alarm Parameters
DeviceId The Device ID of the Airgo AP
Station MAC address of the Station.
Radio Identifies Radio by interface ID on the Access Point
User User ID
Group Group tag for this user (determined from RADIUS configuration)
SSID Identifies the SSID on this AP that the STA has associated with.
Alarm Severity
Severity Critical