User's Manual

Security: Upstream AP is using an untrusted auth server

Installation and Configuration Guide: Airgo Access Point 259

Usage: This indicates that the AP has determined that the station authentication sequence

did not complete in time.

Examples: For device-id AP_00-0A-F5-00-01-89 , the STA 00:0a:f5:00:05:f0 [0] on radio 0 with user

paul and SSID NewYorkRm did not complete its auth sequence in time with auth-type 4

and enc-type 6 due to reason code 6

See Also: EAP User-ID timeout, EAP Response Timeout

Security: Upstream AP is using an untrusted auth server

Notification which indicates that the local BP has determined that the upstream AP is using an un-

trusted auth server.

Syntax: "For device-id %s, the upstream AP %s with SSID %s authenticating via

local BP radio %d is using an untrusted auth server %s with certificate

SHA-1 thumbprint %s : IT MIGHT BE A ROGUE AP”

Description: This notification is generated when the local BP has determined that the

upstream AP is using an un-trusted auth server.

Usage: This indicates that the local BP has determined that the upstream AP is using an

un-trusted auth server. This may indicate that the upstream AP is a rogue AP. It is

safe to say that the upstream AP and the downstream AP are not enrolled in the

same network. If the downstream AP was previously enrolled elsewhere, then reset

it and re-enroll it in the new network.

Examples: For device-id AP_00-0A-F5-00-01-89 , the upstream AP 00:0a:f5:00:06:22 with SSID

NewYorkRm authenticating via local BP radio 0 is using an untrusted auth server

00:0a:f5:00:01:45 with certificate SHA-1 thumbprint

98:72:a8:6d:56:f8:92:a8:f3:97:ec:3f:fa:0b:66:4e : IT MIGHT BE A ROGUE AP