User's Manual

Security: RADIUS timeout too short
Installation and Configuration Guide: Airgo Access Point 257
Description: This notification is sent during authentication, when the RADIUS server sends a
bad response. The aniNotifCauseCode identifies the reason associated with this
bad response.
Usage: This indicates that the AP has determined that a RADIUS server has sent a bad or
unexpected response. The response could be bad because the cryptographic
signature check might have failed or because an attribute might be missing or
badly encoded.
Examples: For device-id AP_00-0A-F5-00-01-89 , the RADIUS server 192.168.75.230:1812 sent back
a bad response due to 7
See Also:
Security: RADIUS timeout too short
Notification which indicates that the AP has determined that a RADIUS server has sent a late
response. This indicates that the APs RADIUS timeout might need to be increased.
Syntax: "For device-id %s, the RADIUS server %s:%d sent a late response - you
might need to increase your RADIUS timeout of %d seconds"
Description: This notification is generated when the AP receives a late response from the
RADIUS server The IP address of the RADIUS server.
Port The port used to communicate with the RADIUS server.
Response The reason codes for the bad response: BAD SIGNATURE BASED
ON SHARED SECRET (0), UNEXPECTED RESPONSE TYPE
WHEN DOING EAP AUTH (1), UNEXPECTED RESPONSE
TYPE WHEN DOING MAC-ACL LOOKUP (2), LEGAL MS-
MPPE KEYS NOT PRESENT (3), BAD ENCODING FOR USER
GROUP ATTRIBUTE (5)
Alarm Severity
Severity Critical
Alarm Parameters
DeviceId The Device ID of the Airgo AP
RADIUS server The IP address of the RADIUS server.
Port The port used to communicate with the RADIUS server.
RADIUS timeout The current setting of the RADIUS timeout.
Alarm Severity
Severity Critical