User's Manual

Security: Management User login failure
Installation and Configuration Guide: Airgo Access Point 253
succeeded.
Examples: For device-id AP_00-0A-F5-00-01-89 , the management user 'admin' with privilege level 1
logged in succesfully via 1
See Also:
Security: Management User login failure
Notification which indicates that the AP has determined that a Management user login has failed.
Syntax: "For device-id %s, the management user '%s' failed to login successfully via
%d”
Description: This notification is generated when a management User login attempt is
unsuccessful.
Usage: This indicates that the AP has determined that a Management user login has failed.
Too many failed logins in succession might attempt that someone is trying to break
into your AP.
Examples: For device-id AP_00-0A-F5-00-01-89 , the management user 'admin' failed to login
successfully via 1
See Also:
Security: STA failed EAPOL MIC check
Notification which indicates that the AP has determined that a STA has failed a MIC check during
the EAPOL authentication exchange.
Syntax: "For device-id %s, the STA %s[%d] on radio %d with user-id %s and SSID
%s failed an EAPOL-MIC check with auth-type %d during key exchange
%d. (If using WPA-PSK, check the PSK on the STA.)"
DeviceId The Device ID of the Airgo AP
Management User Username of management User.
Login access Identifies the type of access, console, or SSH. (Ignore in this release.)
Alarm Severity
Severity Critical
DeviceId The Device ID of the Airgo AP
Station MAC address of the Station.
bpIndicator Identifies if the supplicant is a BP (1), or a STA (0).
Radio Identifies Radio by interface ID on the Access Point