User's Manual
Security: RADIUS Server timeout
Installation and Configuration Guide: Airgo Access Point 251
Description: This notification is generated when a Bridge Portal (radio) authentication fails. The
context of the BP radio and the RADIUS server which rejected the BP radio are
also provided. A BP attempts authentication when a wireless backhaul is being
established.
Usage: This indicates that a security portal has rejected a BP’s authentication attempt with
this AP. Usually it means that the BP is not enrolled in the same network as the AP.
It may also mean that the BP was just enrolled, and the enrollment database has not
yet been synced across the network to all security portals.
Examples: For device-id AP_00-0A-F5-00-01-89 , the RADIUS server 192.168.75.230:1812 from
auth zone BldgOne rejected the node 00:0a:f5:00:06:22 on radio 0 with device-id AP_00-
0A-F5-00-01-89 and SSID NewYorkRm
See Also:
Security: RADIUS Server timeout
Notification which indicates that the AP has determined that a RADIUS server has failed to
respond within the RADIUS timeout.
Syntax: "For device-id %s, the RADIUS server %s:%d from auth zone %s failed to
respond within %d seconds and %d attempts while authenticating STA %s
on radio %d with user-id %s and SSID %s"
Node MAC address of the BP node
Radio Identifies Radio by interface ID on the Access Point
Device ID The Device ID of the BP node
SSID Identifies the SSID on this AP that the STA has associated with
Alarm Severity
Severity Critical
Alarm Parameters
DeviceId
The Device ID of the
Airgo AP
RADIUS server The IP address of the RADIUS server.
Port The port used to communicate with the RADIUS server.
Auth Zone The name of the auth Zone on this AP that this RADIUS server is a
member of
RADIUS timeout The current setting of the RADIUS timeout.
RADIUS retries The number of retries performed
Station MAC address of the Station.