User's Manual

Security: Guest Authentication Failed
Installation and Configuration Guide: Airgo Access Point 249
See Also: Security: Guest Authentication Failed
Security: Guest Authentication Failed
Notification which indicates that a “Guest Access” Station has failed authentication
Syntax: "For device id %s, Guest authentication failed for STA %s on radio %d
with SSID %s using captive portal %s and guest mode %d due to %d"
Description: Notification which is generated when a “Guest Station” fails authentication.
Usage: This indicates that a Guest Station did not present the appropriate “credentials”
(currently simple password) upon request.
Examples: For device-id AP_00-0A-F5-00-01-89 , Guest authentication failed for STA
00:0a:f5:00:05:f0 on radio 0 with SSID NewYorkRoom using captive portal Internal and
guest mode 4 due to 0
See Also: Security: Guest Authentication Succeeded
Security: User rejected by RADIUS Server
Notification which indicates that the AP has determined that a User has been rejected by RADIUS.
Syntax: "For device-id %s, the RADIUS SERVER %s:%d from auth zone %s
rejected the STA %s on radio %d with user-id %s and SSID %s"
Alarm Parameters
DeviceId The Device ID of the Airgo AP
Station MAC address of the Guest STAtion.
Radio Identifies Radio by interface ID on the Access Point
SSID Identifies the SSID on this AP that the Guest has associated with.
Captive Portal Identifies the “Landing Page” that has accomplished authentication of
the Guest STA. This is either simply the Internal “Landing Page”, or
a URL identifying the “External Landing Page” which performed the
authentication.
Guest Mode Currently, always set to 4.
Reason code Currently, always set to 0.
Alarm Severity
Severity Critical