User's Manual

C Alarms
248 Installation and Configuration Guide: Airgo Access Point
1 Loss of Link (applies to BP side only)
2 Trunk brought down by uplink AP (applies to BP side only)
3 User retrunk issued (this can occur due to new backhaul con-
figuration being applied on BP)
4 Trunk has reformed with another AP (AP side only)
5 Trunk brought down by BP (applies to AP side only)
Usage:
Informational log
Examples: WDS trunk brought down for Device ID AP_00-0A-F5-00-01-B6 radio 4 remote MAC
00:0a:f5:00:3a:fb CauseCode 0
See Also:
Security: Guest Authentication Succeeded
Notification which indicates that a “Guest Access” Station has been successfully authenticated
Syntax: "For device-id %s , Guest authentication succeeded for STA %s on radio
%d with SSID %s using captive portal %s and guest mode %d"
Description: Notification which is generated when a “Guest Station” is authenticated.
Usage: This indicates the successful start of a “Guest Access” Stations communications
session. This Guest STA will be offered the communications services specified in
the Guest Profilethat has been configured for the specified SSID.
Examples: For device-id AP_00-0A-F5-00-01-89 , Guest authentication succeeded for STA
00:0a:f5:00:05:f0 on radio 0 with SSID NewYorkRoom using captive portal Internal and
guest mode 4
Alarm Parameters
DeviceId The Device ID of the Airgo AP
Station MAC address of the Guest STAtion.
Radio Identifies Radio by interface ID on the Access Point
SSID Identifies the SSID on this AP that the Guest has associated with.
Captive Portal Identifies the “Landing Page” that has accomplished authentication of
the Guest STA. This is either simply the Internal “Landing Page”, or
a URL identifying the “External Landing Page” which performed the
authentication.
Guest Mode Currently, always set to 4.
Alarm Severity
Severity Normal