User's Manual

C Alarms
246 Installation and Configuration Guide: Airgo Access Point
Wireless: WDS Failed
Notification which indicates a failure in formation of Wireless Backhaul
Syntax: "WDS trunk brought down for DeviceId %s radio %d remote MAC %s
CauseCode %d"
Description: This is a notification generated when a wireless backhaul formation fails. The
remote end’s MAC address is provided. This notification is generated by AP node.
Reason Code Description
0 System Failure
1 Maximum BP count has been reached (this relevant only for
AP)
2 Join attempt to the uplink AP failed (relevant only on BP side)
Usage:
This can be used to track any losses in connectivity of network.
Examples: WDS trunk brought down for Device ID AP_00-0A-F5-00-01-B6 radio 4 remote MAC
00:0a:f5:00:3a:fb, CauseCode 0
See Also:
Wireless: WDS Up
Notification which indicates successful formation of wireless backhaul
Syntax: "WDS trunk established for DeviceId %s radio %d remote mac %s
TrunkPort count %d CauseCode %d”
Alarm Parameters
DeviceId The Device ID of the Airgo AP
Radio Identifies Radio by interface ID on the Access Point
Remote MAC Address MAC address of remote end of backhaul link
Cause Code Reason Code for WDS formation failure
Alarm Severity
Severity Critical
Alarm Parameters
DeviceId The Device ID of the Airgo AP