User's Manual

C Alarms

244 Installation and Configuration Guide: Airgo Access Point

1 - Invalid parameters received from station in association request

2 - Only stations are allowed to associate with this AP based on current configuration

3 - Only backhauls can be formed with this AP based on current configuration

4 - Max backhaul limit is reached based on the 'Max Trunks' configuration for AP

Admission Criteria

5 - Max station limit is reached based on the 'Max Stations' configuration for SSID

6 - SSID received in association request does not match SSID in AP configuration. This

can occur more often when AP is not broadcasting SSID in beacon (either due to SSID

being surpressed or multiple SSIDs being configured) and station is associating with AP

with a different SSID.

7 - Authentication and encryption requested by station does not match security policy of

the AP

8 - Multi Vendor Station are not allowed to associate based on AP Admission Criteria

9 - 802.11b stations are not allowed to associate based on AP Admission Criteria

10 - Station is not allowed to associate and transferred to another AP Radio due to Load

Balancing

11 - Station is not allowed to associate because node does not have network connectivity

Usage:

The reason for the association failure can be used to determine any configuration

issue in the system which may be causing the association failures.

Examples: Station association failed for Device ID AP_00-0A-F5-00-01-B6 radio 4 station MAC

00:0a:f5:00:3a:fe CauseCode 2