User's Manual

Wireless: STA Association Failed
Installation and Configuration Guide: Airgo Access Point 243
Description: This is a notification generated when operating frequency is changed for an AP
radio due to either user triggers or events such as peridic DFS. The reason code can
have an value of 0 which is unspecified reason. The new channel ID is also
provided.
Reason Code Description
0 Triggered due to DFS
1User Triggered
Usage:
This is an informational log.
Examples: Frequency Changed for Device ID AP_00-0A-F5-00-01-B6 radio 4 channelId 64
CauseCode 0
See Also:
Wireless: STA Association Failed
Notification which indicates that the association failed for a 802.11 station.
Syntax: "Station association failed for DeviceId %s radio %d station MAC %s
station status %d CauseCode"
Description: This is a notification generated when a association from a 802.11 station fails with
the AP radio. The reasons for the failure are encapsulated in the cause code
parameter and are as follows:
Radio Identifies Radio by interface ID on the Access Point
Channel ID This indicates the channel on which the AP is operating.
Cause Code Reason why frequency changed
Alarm Severity
Severity Critical
Alarm Parameters
DeviceId The Device ID of the Airgo AP
Radio Identifies Radio by interface ID on the Access Point
STA MAC Address MAC address of 802.11 station.
STA status Association or reassociation
Cause Code Reason why station association failed
Alarm Severity
Severity Critical