User's Manual

C Alarms
242 Installation and Configuration Guide: Airgo Access Point
b. Radio reset caused due to application of wireless specific configuration
c. Radio reset triggered by hardware
d. Radio reset due to change in SSID
Examples: Device Id AP_00-0A-F5-00-01-B6 radio 4 disabled
See Also: <List of other alarms>
Wireless: BSS Enabling Failed
Notification which indicates that the AP radio (BSS) enabling failed.
Syntax: “Bss enabling failed for DeviceId %s radio %d CauseCode %d”
Description: Notification which indicates that AP rado enabling has failed
Usage: The AP radio enabling can fail for reasons which are indicated by the Cause code
parameter:
0 – Unspecified reason
1 – System timeout attempting to enable BSS.
Examples: Bss enabling failed for Device Id AP_00-0A-F5-00-01-B6 radio 4 Cause Code 1
See Also: <List of other alarms>
Wireless: Frequency Changed
Notification which indicates that the frequency of operation changed on the AP.
Syntax: "Frequency changed for DeviceId %s radio %d channelId %d CauseCode %d"
Alarm Parameters
DeviceId The Device ID of the Airgo AP
Radio Identifies Radio by interface ID on the Access Point
Cause Code Reason for AP radio enabling failure
Alarm Severity
Severity Critical
Alarm Parameters
DeviceId The Device ID of the Airgo AP