User's Manual

Wireless: Radio enabled (BSS Enabled)
Installation and Configuration Guide: Airgo Access Point 241
Wireless: Radio enabled (BSS Enabled)
Notification which indicates that AP radio has been enabled.
Syntax: "Device ID %s radio %d is enabled, its operational state is %d operating on
%d"
Description: Notification which is generated when a AP radio (BSS) is enabled
Usage: This indicates successful start of a BSS and also provides the channel on which the
AP radio will be operating on.
Examples: Device ID AP_00-0A-F5-00-01-B6 radio 4 is enabled, its operational mode is 1 and
operating on 64
See Also:
Wireless: Radio Disabled (BSS disabled)
Notification which indicates that the AP radio has been disabled.
Syntax: "Device Id %s radio %d disabled"
Description: Notification which indicates that AP has been disabled.
Usage: The AP radio can be disabled for several reasons such as:
a. User Triggered (administrative disabling)
Alarm Parameters
DeviceId The Device ID of the Airgo AP
Radio Identifies Radio by interface ID on the Access Point
Operational Mode This indicates the operational mode of the radio whether it is 802.11a,
802.11b or 802.11g
Channel ID This indicates the channel on which the AP is operating.
Alarm Severity
Severity Critical
Alarm Parameters
DeviceId The Device ID of the Airgo AP
Radio Identifies Radio by interface ID on the Access Point
Alarm Severity
Severity Critical