User's Manual

C Alarms
240 Installation and Configuration Guide: Airgo Access Point
Description: This alarm is when an image is un-successfully downloaded and applied to an AP.
Usage: Image download failures can happen due to corrupted images, invalid length
images or due to connectivity failures.
Examples: For accesspoint Node AP_00-0A-F5-00-01-77 The software image [] from [AP_00-0A-F5-
00-01-77 ] could not be downloaded due to error 24581 at time[Fri Jan 7 04:12:35 2000 ]
See Also: <Image Download Succeeded, Software Distribution Succeeded>
Software Download: Software Distribution Succeeded
Alarm generated when an image distribution is completed.
Syntax: On DeviceId %s, the Software image [%s] distribution request from
portal[%s] using the Distribution TaskId=%s and with status=%s
completed at time[%s]
Description: This alarm is when an image distribution is completed. Image distribution is
Usage: Informational log.
Examples: On DeviceId AP_00-0A-F5-00-01-77 , the Software image [0.7.0, build A.2286, AGN1dev,
Airgo Inc., ] distribution request from portal[AP_00-0A-F5-00-01-77 ] using the
Distribution TaskId=000000 and with status=172.16.12.4, , 0, 947304168, 947304183,
invalid image file. completed at time[Tue Jan 6 21:32:18 1970 ]
See Also: <Image Download Failed, Image Download Succeeded>
from The device ID of the source of the image
error The failure error code
time The time at which the error occurred
Alarm Severity
Severity Critical
Alarm Parameters
DeviceId The device ID of the remote AP
image The image version
portal The device ID of the source of the image (NMS or NMPortal)
TaskId The task ID of the distribution
status The distribution status (success or failure) of the selected APs
time The time at which the distribution was done
Alarm Severity
Severity Critical