User's Manual

Configuring SSID Parameters
Installation and Configuration Guide: Airgo Access Point 83
Perform the following functions from the service profile list on this tab:
Figure 56: SSID Configuration - Bind Service Profile to SSID
Security Enforcement Type of encryption required for the service profile. For user groups assigned
to this service profile, the security enforcement setting supersedes the
encryption type configured for the overall network.
Function Steps
Bind an existing service
profile to an SSID
1 Click Add to open the Bind Service Profile to SSID entry panel
(Figure 56).
2 Select the profile name, or click Add New Profile to create a new
profile according to the instructions in “Profile Table” on page 84.
3 Select a group name from the existing RADIUS group names to
associate with the profile, or select New Group and enter a new user
group name.
4 Click Apply.
Change service profile
binding
1 Select the checkbox for the user group and profile, and click Modify
to open the Bind Service Profile to SSID entry panel (Figure 56) in
modify mode.
2 Select a profile to bind to the SSID, or click Add New Profile to
create a new profile according to the instructions in “Profile Table” on
page 84.
3 Click Apply.
Delete service profile binding 1 Select the checkbox for the user group and profile, and click Delete.
2 Click OK to confirm.
Configure security for the
SSID
Click Go at the bottom of the panel. The button leads to the SSID
Authentication tab of the Wireless Security panel. For instructions on
defining the security settings, refer to “SSID Authentication” on
page 140. After defining the security settings, click Back on the browser
to return to the SSID Details tab.
Feature (continued) Description