User's Manual

4 Configuring Radio Settings
78 Installation and Configuration Guide: Airgo Access Point
Use the scrolling bars to display the full range of interfaces and data.
Configuring SSID Parameters
A wireless network is formed when a set of APs advertises the same value as the SSID, or network
name. Figure 52 shows the Acme Works network with multiple Airgo APs, each advertising the
same “Corporate” SSID.
Figure 52: Example “Corporate” Network
Each Airgo AP is shipped with a default SSID, which must be replaced during the bootstrap
process (see “Using AP Quick Start to Initialize the Access Point” on page 31) or from the SSID
Configuration panel, as explained in this section. Multiple SSIDs are also supported. “Multiple
SSIDs” on page 85 explains how to enable this feature and permit clients to access multiple
wireless networks through the same access point.
A0042D
SSID="Corp"
SSID="Corp"
10/100 Switched Ethernet