User's Manual

4 Configuring Radio Settings
70 Installation and Configuration Guide: Airgo Access Point
Click Apply to save changes or Reset to return to previously saved values.
IEEE 802.11 Extensions Indicate whether to support standard Dot11 extensions, enhanced extensions,
or both. The checkboxes enable or disable standard 802.11 extensions such as
11h, 11e, 11g or 11i, or Airgo enhanced features, which are compatible only
with Airgo client stations. If the Enhanced 802.11 extensions option is
selected, then it is possible to enable the following through the CLI (they are
not automatically enabled).
• Enhanced rate set (specific flag needs to be set)
• Proprietary burst ack
• Advanced rate adaptation
• Wireless backhaul AP name in beacon (if not enabled, the AP name in
beacon is suppressed)
802.11G Protection Select to enable 802.11g protection mode, short slot time, and short preamble
if the radio is operating in 802.11g mode.
If the checkbox is selected, all 3 aspects are enabled; if not, all 3 aspects are
disabled. The default setting is disabled.
Select Basic Rate Set Enter basic data rates for the different 802.11 modes. To set rates, select Set
and enter the rates with a space as the delimiter. The basic 802.11 rates are
advertised in beacons and inform the client stations of the minimum set of
rates it must support to be part of the BSS. 802.11 control frames such as
ACKS, CTS, and RTS are transmitted at basic rates.
Feature (continued) Description