User's Manual

4 Configuring Radio Settings
66 Installation and Configuration Guide: Airgo Access Point
Performance
Use the Performance tab (Figure 45) to configure enhanced data rates of 72, 96, or 108 Mbps.
Figure 45: Radio Configuration - Performance
Set the following values on this tab:
Feature Description
Select Radio Interface Select the AP radio (wlan0 or wlan1)
Enhanced Data Rates Enable or disable the Airgo enhanced data rates of (72, 96, and 108 Mbps).
This setting is rejected if the enhanced Dot11 extensions are disabled and an
attempt is made to configure enhanced data rates. It is recommended to accept
the default of Enabled.
Rate Adaptation Enables or disables automatic data rate adaptation in the system. To use auto-
adaptation, select the Auto Adapt button and select the Basic or Advanced
option. Otherwise, select fixed along with a fixed rate. It is recommended to
accept the default value of Auto Adapt and Basic.