User's Manual

3 Using the Configuration Interfaces
52 Installation and Configuration Guide: Airgo Access Point
6 Select an existing VLAN in which to place authenticated guest users, or create a new VLAN by
entering a numeric VLAN ID and VLAN name (Figure 39). The list of existing VLANS
includes only those that support open access.
Figure 39: Guest Access Wizard - VLAN Entry
7 Click Finish.
Guest access is now configured. When guests access the external landing page, they follow an
externally-determined process to log in to the network. If a subnet has been specified, then guests
can access the subnet even if they are not able to log in. For further information about guest access,
or to modify guest access parameters, see Chapter 7, “Managing Security.”