User's Manual

Navigating the Web Interface
Installation and Configuration Guide: Airgo Access Point 43
Portal Config Tab
Use the Portal Config tab (Figure 29) to enable portal services on this AP. See “Portal Architecture”
on page 4 for a description of the portal services.
Figure 29: AP Quick Start - Bootstrap Configuration - Portal Config
Admin Email Tab
If the AP is configured as a portal AP, use the Admin Email tab (Figure 30) to specify how to alert
the network administrator regarding critical faults or security breaches. Configure the following
fields:
Synchronize Clock Indicate whether time will be synchronized manually through the date and
time fields, or by way of an NTP server. If you select the server option, enter
the IP address of the server in the space provided. If an NTP is currently
assigned, the address of the server is displayed, as shown in
Figure 28.
Multiple NTP servers may be specified (space separated). If more than one
server is specified, they are contacted in the order given. If the Synchronize
Clock is empty, then all manually configured NTP servers will be deleted.
If the AP is configured to receive an IP address via DHCP, then the DHCP
server could also return the set of NTP servers. In such a scenario the
manually configured NTP servers take precedence over the DHCP returned
NTP servers.
If you delete NTP servers, only those added manually are deleted. DHCP-
assigned NTP servers continue to be available.
Field Description
SMTP Server Address Enter the IP address of the SMTP server used to reach the network
administrator.
Admin E-mail Address Enter the email address of the network administrator.
Field Description