User's Manual

3 Using the Configuration Interfaces
42 Installation and Configuration Guide: Airgo Access Point
For further information regarding these settings, see Chapter 4, “Configuring Radio Settings.”
Clock Config Tab
Use the Clock Config tab (Figure 28) to set time parameters for the bootstrap configuration.
Figure 28: AP Quick Start - Bootstrap Configuration - Clock Config
This tab contains the following settings:
Configure Channel Select Auto-Select Channel or Assign Fixed Channel options:
• Auto-Select: Select At Start-up to automatically determine the channel
when the AP is booted, or Periodic to auto-select the channel at the
specified number of minutes. The default is Periodic and 30 minutes.
• Assign Fixed Channel: Select a static channel.
In both of these cases, the channel set used for auto-scanning can also be
restricted.
Field Description
Date Current date in MM/DD/YYYY format
Time Current time in HH:MM:SS format (hours 0-23)
Time Zone US-zone or GMT option. For US zone, click the radio button and select a
time zone. For GMT, click the radio button and select an offset in HH:MM
format.
Field Description