User's Manual

Navigating the Web Interface
Installation and Configuration Guide: Airgo Access Point 39
Quick Start Panels
Use the AP Quick Start menu items to open the Bootstrap Configuration and Version panels. Each
of the tabs in the Bootstrap Configuration panel corresponds to one of the screens used to initialize
an AP in AP Quick Start.
IP Config Tab
The IP Config tab opens when you choose Bootstrap Configuration is selected from the AP Quick
Start menu (Figure 26). Use this tab to configure addresses for the bootstrap configuration.
Figure 26: AP Quick Start - Bootstrap Configuration - IP Config
This tab contains the following settings:
Field Description
DHCP Assigned IP
Address
Indicate whether to use DHCP to obtain an IP address for the AP. If the box is
cleared, the other Management IP Configuration fields are activated; if the
box is selected, the other Management IP Configuration fields are inactive.
APs.