User's Manual

3 Using the Configuration Interfaces
34 Installation and Configuration Guide: Airgo Access Point
2 Click Next to continue to the next panel (Figure 20). Use this panel to configure network
identity.
Figure 20: QuickStart Network Identity
3 Configure the following information on this panel:
Default Gateway IP address of the gateway to the wired network. Required if the IP address is
not obtained automatically to provide complete network access. The default
is the existing network gateway.
Domain Name Servers IP address of the server supplying DNS service. Required if the IP address is
not obtained automatically to provide complete network access. The default
is the DNS server for the existing network.
Date Current date in MM/DD/YYYY format
Time Current time in HH:MM:SS format (hours 0-23)
Time Zone US-zone or GMT option. For US zone, click the radio button and select a
time zone. For GMT, click the radio button and select an offset in HH:MM
format.
Field Description
SSID Name Service set identifier for the network, also known as the Wireless Network
Name. The default name must be changed. (required)
Network Density Indication of how close the APs will be to each other. For closely spaced APs
that can support high data rates, select the high density option. For maximum
coverage at lower data rates, selection the low density option. The default
setting is Low.
Field Description