User's Manual

6 Configuring a Wireless Backhaul
132 Installation and Configuration Guide: Airgo Access Point
This tab contains the following information:
If no trunks are detected, the table is empty.
Trunk Statistics
Select the Trunk Statistics tab (Figure 100) to statistics for the available backhaul trunks. If no
trunks are detected, the table is empty. To clear the cumulative statistics, click Clear Statistics.
Figure 100: Backhaul Configuration - Trunk Stats
This tab contains the following information:
Feature Description
Interface Name Radio interface of the BP radio (uplink) or AP radio to which downlink trunks
are connected. Applies to uplink and downlink trunks.
Band (2.4 GHz or 5
GHz, or both)
Operating band of the uplink or downlink trunks. Applies to uplink and
downlink trunks. For the uplink trunk the band is the operating band of the BP
radio. For downlink trunks the band is the operating band of the AP radio.
Trunk Dest MAC MAC address (BSSID) of the remote backhaul destination. For Uplink trunks
this is the MAC address of the parent AP; for downlink trunks it is the MAC
address of the BPs (children) associated with the AP radio. Applies to uplink
and downlink trunks.
Channel ID of the channel on which the backhaul trunks (uplink and downlink) are
operating. Applies to uplink and downlink trunks.
Re-trunk counts Number of times the BP (uplink) retrunked (could be due to trunk failure or
trunk optimization). Applies only to the uplink trunk.
Link Type Indication of whether the interface is an uplink or downlink trunk
Field Description
Interface The AP radio interface (wlan0 or wlan1)
Rx Bytes Number of bytes received at this AP
Rx Packets Number of packets received at this AP