User's Manual

Setting Up a Wireless Backhaul
Installation and Configuration Guide: Airgo Access Point 131
Candidate APs
Select the Candidate APs tab (Figure 98) to identify the access points that can be used to create the
uplink to the wired network.
Figure 98: Backhaul Configuration - Candidate APs
The panel displays the discovered APs that are able to provide uplink connectivity. The table of
uplink candidate APs shows the following information:
If no uplink candidate APs are available, the table is empty.
Trunk Table
Select the Trunk Table tab (Figure 99) to view the list of current backhaul trunks. The backhaul is
established if the MAC address of the backhaul trunk is listed in the table.
Figure 99: Backhaul Configuration - Trunk Table
Feature Description
Interface Radio interface of uplink candidate parent
Destination MAC
Address
BSSID of the remote uplink candidate parent
AP beacon name Name of the AP node of the candidate parent, sent in beacons