User's Manual

5 Configuring Networking Settings
124 Installation and Configuration Guide: Airgo Access Point
Figure 94: SNMP Configuration
Enter values in the following fields to define the basic SNMP configuration:
Click Apply to save your changes, or Reset to return to previously saved values.
The bottom of the SNMP panel contains a table of currently defined traps. To delete a trap, select it
in the SNMP Agent Table, and click Delete.
Field Description
Community String Enter the alphanumeric community string (required)
Community Read/Write
Status
Indicate the read or read/write status of the community
Trap Sink IP Address Enter the IP address where SNMP traps should be sent (required)
Trap Community Enter the community for SNMP traps
Trap Sink Port Indicate the port identified for the SNMP traps (default is 162)