User's Manual

5 Configuring Networking Settings
118 Installation and Configuration Guide: Airgo Access Point
Configure the following fields on this tab:
Click Apply to save all the changes on the tab.
IP Protocol
Use the IP Protocol tab (Figure 87) to base the COS mapping on IP protocol numbers, as defined in
Version 4 of the IP protocol. Current protocol number assignments are available at http://
www.iana.org.
Figure 87: Advanced QOS Configuration - IP Protocol
Configure the following fields to define the IP Protocol-to-COS map:
Click Apply to save all the changes on the tab.
Field Description
Select Radio Interface Select the AP interface.
Default Select to use the default mapping.
DSCP String If Default is not chosen, enter up to eight DSCP values that you want to map
to a specific COS value.
COS Select the COS value.
Field Description
Select Radio Interface Select the AP interface.
IP Protocol ID Enter the number assigned to the IP protocol.
COS Select the COS value.