User's Manual

5 Configuring Networking Settings
112 Installation and Configuration Guide: Airgo Access Point
Use the QoS Configuration panel to define TCID, VLAN, and Interface COS mappings. Use the
Advanced QoS Configuration panel (“Configuring Advanced QoS” on page 115) to define the IP
and DSCP mapping and to assign class order.The QoS Configuration panel is divided into the
following tabs:
• Ingress QOS—Define COS mappings packets entering the AP.
• Egress COS—Assign priority to the 802.11 packets leaving the AP.
• QOS Stats—Display QoS statistics for each of the AP interfaces.
IP Precedence Defines a mapping based on the first 3 bits in the Type of Service (TOS) byte
of the IP header. Incoming packets that have an IP Precedence value can be
mapped to COS.
DiffServ Code point
(DSCP)-to-COS
Defines a mapping based on the first 6 bits in the TOS byte of the IP header.
Incoming packets that have a DSCP value can be mapped to COS.
IP Protocol Assigns COS value based on the standard numbers for individual IP protocols.
Class Order Determines the order in which all the COS mapping rules are applied.
Rule (continued) Description