User's Manual

Configuring IP Routes
Installation and Configuration Guide: Airgo Access Point 103
Figure 73: Bridge Configuration - ARP Table
Configuring IP Routes
IP routing expands the addressing capability of the Airgo AP and allows you to mange the AP from
outside its local subnet. Use the IP Routing panel (Figure 73) to explicitly address subnets that are
not local. If a destination subnet is not entered into this panel, then default network routing applies.
Figure 74: IP Routing
The Route table shows the static route entries currently configured on the AP and bound to bridging
interfaces. To create a new route, click Add, enter the following information, and click Save.
Field Description
Destination IP Enter the IP address of the subnet to which packets can be forwarded, along
with the subnet prefix for the address.