User's Manual

Configuring Inter Access Point Protocol (IAPP)
Installation and Configuration Guide: Airgo Access Point 91
IAPP Service
Use the IAPP Service tab (Figure 63) to enable IAPP. Selecting Enable initializes IAPP to perform
network discovery and communicate with other APs.
Click Apply to save changes.
Figure 63: IAPP Configuration - IAPP Service
IAPP Topology
The read-only IAPP Topology tab (Figure 64) displays information about all the neighboring APs
this AP has discovered, including the BSSID, IP address, and Compatibility (whether the IAPP
protocol can be established with the neighboring AP).
Figure 64: IAPP Configuration - IAPP Topology