User's Manual

Common Problems and Solutions
Installation and User Guide: Airgo Access Point 257
Poor or lower than
expected signal strength,
as measured by wireless
network adapters
attempting to connect to
the AP
The AP may be poorly placed, or
external antenna may not be
connected properly.
The AP and/or its external antenna should
not be in an obstructed location. Metallic
objects (such as equipment racks) and
some construction materials can block
wireless signals. If this is the case,
reposition the Access Point(s) and/or any
external antennae to be free of these
obstructions.
If using an external antenna, also make
sure it is connected securely to the AP.
Table 17: Common Problems and Solutions (continued)
Symptom Problem Solution