User's Manual

10 Maintaining the Access Point
246 Installation and User Guide: Airgo Access Point
Figure 182: Configuration Management - Secure Backup
Secure Backups with NM Portal
Each NM Portal contains network and security databases in its persistent storage that should be
backed up periodically. Note that the Secure Backup function backs up only the configuration file
of the AP, whereas the secure backup capability in the NM Portal Network Management explorer
allows you to back up the security databases along with the configuration of the AP.
Restore the AP
configuration
1 In the Restore Configuration area, click Browse and select the
configuration file.
2 Click Apply to restore the configuration and reboot the AP.
NOTE: If the AP has been unenrolled or restored to factory defaults, it is not
possible to reapply the configuration using this method. The AP must be
reenrolled and have a new configuration created.
Generate support logs 1 Click Generate Support Logs.
2 When the configuration is generated, a hyperlink is displayed. Right-click
and select Save As to save the configuration locally.
3 After the support logs file is saved, click Delete to remove the file from the
AP. The file takes up space in AP persistent storage, so it is recommended
that you remove it.
Task Steps