User's Manual

Managing the System Configuration
Installation and User Guide: Airgo Access Point 241
Figure 177: System Configuration - IP Configuration
The tab is divided into two sections. Click Apply after configuring each section, or Reset to return
to the default values. Configure the following fields:
Syslog Configuration
Syslog tracks and records information about network activities for later viewing and analysis.
Field Description
DHCP Assigned IP
Address
Enables the AP to obtain an IP address for the AP from the network
DHCP server.
DNS IP Address Enter the IP address of the DNS server. (required)
Management IP address
/Maskbits
Enter the IP address and subnet prefix of the management server.
(required)
Gateway IP address Enter the IP address of the network gateway. (required)
Host Name
Enter a unique name for the AP. The default is the device ID,
which is derived from the MAC address. (required)
AP Location Enter a text description of the physical location of the AP.
Administrator Contact Enter the contact information for the administrator.
CAUTION: Only an authorized administrator should change syslog levels or enable or
disable syslog capabilities. Arbitrary changes to syslog can adversely affect the AP.