User's Manual

Installation and User Guide: Airgo Access Point 239
10
Maintaining the Access Point
A variety of tools are available to maintain the Airgo Access Point.
This chapter describes the tools in the following sections:
• Rebooting the AP
• Saving the AP Configuration
• Managing the System Configuration
• Managing the AP Configuration
• Upgrading Software
• Common Problems and Solutions
Rebooting the AP
Choose Save & Reboot AP from the System Services menu to open the Reboot Configuration
panel. To begin the process, click Reboot (Figure 177). The process takes approximately two
minutes, and may take additional time if the AP is currently used for wireless backhaul service.
Figure 175: System Configuration - Reboot AP
Saving the AP Configuration
Choose Save & Reboot AP from the System Services menu, and then click Save Config to open
the Save Configuration tab (Figure 177).
To save the current AP configuration, click Save Configuration.
To enable global save, click Apply.