User's Manual

9 Managing the Network
234 Installation and User Guide: Airgo Access Point
Figure 171: Mobility Configuration
This tab contains the following information and settings:
Item Description
Enable L3 Mobility
(Tunneling)
Choose Yes to activate the L3 mobility capability, and click Apply. Click
Reset to return to the previously saved value.
Select Mobility Agent
(Wired AP)
Select an AP and click Add to enroll the AP as a mobility agent.
NOTE: Only one AP in a subnet can be designated as a Mobility Agent.
Mobility Agent Table View the list of currently assigned mobility agents.
To delete an agent:
• Choose the entry and click Delete. Click OK to confirm.
To delete all currently assigned agents:
• Click Delete All. Click OK to confirm.