User's Manual

Managing Network Faults
Installation and User Guide: Airgo Access Point 211
The Alarm Summary panel contains three tabs:
• Alarm Summary — View counts of system alarms in the managed network.
• Alarm Table — View a detailed list of alarms.
• Filter Table — Select events that should be filtered out of the reported alarm list
.
Alarm Summary
The Alarm Summary tab (Figure 156) provides an aggregate count of alarms across the network
managed by NM Portal.
The Alarm Summary tab contains the following information:
Figure 156: Fault Management - Alarm Summary
Alarm Table
The Alarm Table tab (Figure 157) provides a detailed description of alarms and enables filtering of
the alarm table for easy viewing and searching. A description of all the alarms is provided in “Airgo
Access Point Alarms” on page 214 and additional details are presented in Appendix D, “Alarms.”
The Alarm Table includes the following information:
NOTE: The alarm count in the lower left corner of the Network Management Explorer
window is the same as that given on the Alarm Summary tab. Click the Alarm
Summary hyperlink to open the Alarm Summary tab.
Field Description
Alarm Count Total alarms in the managed network
Total Alarms Received Total alarms from APs other than this AP
Total Alarms Filtered Count of alarms not displayed because they were filtered out
Alarm Logging Start
Time
Time at which the counts began
Field Description
Alarm ID Text description of the specific alarm