User's Manual

9 Managing the Network

198 Installation and User Guide: Airgo Access Point

Figure 143: NM Services - Policy Management - Policy Table - Details (excerpt)

Define Policy

Define a default policy for bootstrapping other APs in the network by selecting the configuration of

this AP as a model. The default policy is pushed automatically to newly enrolled APs. Use the

Define Policy tab (Figure 144) to choose the default policy.

Perform the following functions from this tab:

NOTE: The NM Portal AP requires two radios in order to construct a default policy for

two-radio APs.

Function Description

Generate a default

policy from a pre-

defined policy

Select a policy from the pull-down list, and click Apply. Not currently

supported.

Use this AP’s start-up

configuration to

generate a default

policy.

Select the checkbox, and click Apply.