User's Manual

9 Managing the Network
186 Installation and User Guide: Airgo Access Point
Viewing IP Topology
The IP Topology panel lists all the APs discovered by NM Portal and the APs that were manually
added to the network topology (see “Configuring Network Discovery” on page 200). Choose IP
Topology from the Network Topology menu to display this information (Figure 133).
Figure 133: Network Topology - IP Topology
The table includes the following information for each AP:
Field Description
Name IP address assigned to the AP
Device ID Unique AP identifier sent during the discovery process and required for AP
enrollment (The device ID is included in the paperwork shipped with the AP.)
Operation State Indication of whether the AP can be reached from the NM Portal AP (The
operation state is updated once every five minutes.)
MAC Address MAC addresses assigned to each of the AP radios (The address of the wlan0
radio is listed first and the wlan1 radio is listed second.)
Auto/Manual Indication of whether the AP was discovered automatically or manually
identified